# Create Shear Panels & Blocks in Layout

**Purpose**

Quickly create shear panels and blocks in layout.

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon.png) Watch video

1. On the **Truss Placement** menu, select **Next Truss**.


The **Next Truss** dialog displays.

![](/images/csdirector-cstruss/resources/images/ts-nexttrussdialog.png)

1. Define settings for the truss and click **OK**.


The following prompt displays: ![](/images/csdirector-cstruss/resources/images/ts-createreferencelineprompt.png)

1. Create a reference line to position trusses and enter an offset, if desired.


![](/images/csdirector-cstruss/resources/images/ts-referencelinelayout-shearpanels-1075x558.png)

1. Drag a line parallel to the reference line on the side where you want to add the panels.


![](/images/csdirector-cstruss/resources/images/ts-dragrubberband-1002x549.png)

The Shear Panels/Blocks dialog displays.

![](/images/csdirector-cstruss/resources/images/ts-shearpanels-blocks.png)

The following options are available:

- TC (Roof) Bevel - check to bevel top chord
- Shear Panel - check to create shear panels
- Block - check to create blocks (blocks, unlike shear panels, do not have webs). Blocks can also be stacked or used as single blocks. When you select this option, additional options display:
  - Use common span for all blocks - choose this option to use the same size blocks for all locations on the truss.
  - Auto Block Sizes - lets Truss Studio select the block size using lumber in inventory.
  - Lock Top/Bottom Block Dimension - select to create a stacked block. The application forces the block size you select.
- Number of Panels - Select an option from the dropdown list. Forces the number of panels you select. The **From Setting** option uses the setting specified in EnvData > Geometry > GeometryControls > Shear Panel vertical panel length.
- Include Top Block - Include a top block on the shear panel. When you select this option, additional options display:
  - ![](/images/csdirector-cstruss/transparent.gif)Lock Block Dimension - select to lock top height. In the example below, a 2"x 6" block was placed on top of the shear panel. See example.   ![](/images/csdirector-cstruss/resources/images/ts-sheartopblock-ex1.jpg)
  - Lock Shear Panel Dimension - select to lock bottom height. The shear panel height is locked at the dimension you selected; the top board will be adjusted based on this dimension.


![](/images/csdirector-cstruss/resources/images/ts-shearpanels-topblockoptions.png.jpg)

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) **Note:** You may want to turn off visibility of labels until you finish adding all shear panels. Click the **Label** icon ![](/images/csdirector-cstruss/resources/images/ts-labelsicon.png) to toggle labels on/off.

![](/images/csdirector-cstruss/resources/images/ts-shearpanelsadded.png)

![](/images/csdirector-cstruss/resources/images/ts-shearpanels3dview.png)

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) **Note:** In the Truss Properties pane, trusses that were created perpendicular to existing trusses have the Truss Shear Panel field set to **Yes**.

![](/images/csdirector-cstruss/resources/images/ts-trussshearpanel-253x334.png)

**Related Topics**

[Shear Panel Settings](/csdirector-cstruss/help-center/truss-studio-online-help/env-data-settings/shear-panels-settings)