# Shear Panel command

**Command**

sp #

**Description**

The Shear Panel command allows you to designate a truss as a shear panel truss.

**Examples**

**Example 1**

If you use **sp** without a number, Truss Studio uses the default shear panel height defined in the Env Data setting and, starting from the bottom, automatically creates vertical panels of that dimensional height, leaving a “take up” panel at the top section of the truss, if that top section is equal to or greater than 1’ high.

![](/images/csdirector-cstruss/resources/images/ts-spcommandexample-1-671x422.png)

If the top section of the shear panel is less than 12” high, Truss Studio still creates a “take up” panel as the top section, but it will be greater than the default length defined (the minimum automatic panel height is 1 foot).

![](/images/csdirector-cstruss/resources/images/ts-spcommandexample-1a-333x411.png)

**Example 2**

If you enter a number after the **sp** command, Truss Studio divides the height of the truss into that many equal segments.

![](/images/csdirector-cstruss/resources/images/ts-spcommandexample-2-379x459.png)

**Example 3**

If **Auto-add drag load to shear panels** is set to **true**, by adding **sp** to the top chord profile line, Truss Studio automatically enables the default drag load (defined in the EnvData setting) and enables the Shear Panel setting in the Drag Load dialog.

![](/images/csdirector-cstruss/resources/images/ts-spcommandexample-3-518x286.png)

**Note:** You can also use the web flip option to reverse the diagonals; and, you can select and delete members. For example, you can change the 3-panel truss shown above into the following.

![](/images/csdirector-cstruss/resources/images/ts-spcommandexample-4-182x239.png)

**Related Topics**

[Create Shear Panels & Blocks in Layout](/csdirector-cstruss/help-center/truss-studio-online-help/shear-panels/create-shear-panels-blocks)