Purpose
Chases in floor trusses provide a space where mechanical duct work, wires etc. can pass through the truss. In Truss Studio, you can easily align chases through trusses with different spans.
Prerequisites
A 4x2/3x2 parallel chord truss layout
Steps
- Select a 4x2 or 3x2 truss. The selected truss is highlighted.
- From the Truss Modifications menu, select Chase or click
. This button is available only if 4x2 or 3x2 trusses are selected.
The caption bar displays the prompt: 
- Create a reference line by selecting a wall edge, truss edge, plane edge, or work line. You can also create a reference line using any of the reference line commands.
The reference line is displayed (as a dashed green line). If you selected an edge, the Enter Offset Dialog also displays. 
- Enter an offset distance and click OK.
The caption bar displays the prompt: 
- Select the side of the line to move it in the desired direction.
The reference line is displayed in the selected location and the Chase Orientation window displays.

- Select an option for chase orientation from the left heel:
- Toward
- Center
- Away
- Select a Chase Width.
The Keep Input Chases option (when selected) keeps any chases input (chases that are written on the Web Profile line) and creates a new chase. This gives you the ability to create multiple chases in the layout on a single floor truss. If the selected trusses do not already have a chase written (scripted) on the Web Profile line, this option is not available.
Note that if the new chase overlaps the existing chase, a message displays, Chase overlaps with existing chase and was not placed; the chase is not placed.
Notes
Once a chase is scripted in the web profile line of the selected trusses, it remains unlocked; this lets you create multiple chases on a single truss.
If you add a chase to a locked truss, a message displays asking you to unlock the truss first. You must do this before you can add a chase in the layout.
Examples



Note that you can also use snap points at the centerline of chases.

Related Topics